Distributor prices refreshed every 6 hours · Free to start

The right part, at the best price, in one search.

Circuit Sherpa queries DigiKey and Mouser — prices refreshed every 6 hours — and ranks every offer by price and stock. Paste your BOM and get the full build cost, with stock and MOQ warnings on every line, in seconds. No more tab-hopping between distributor sites.

Free plan · 10 searches a day · 1 price alert · No credit card

Coming soon onApp Store
Coming soon onGoogle Play
STM32F103C8T6
Sample result
STM32F103C8T6
STMicroelectronics
MCU 32-bit ARM Cortex M3 RISC 64KB Flash 2.5V/3.3V 48-Pin
Best price
$2.29
at DigiKey
DigiKeyBest
$2.29
10,400 in stock
Mouser
$2.34
5,200 in stock
One query — results from DigiKey and Mouser

Built for the way hardware actually gets sourced

Search, compare, price the build, and watch the market — without leaving one tab.

⚡

Priced at your quantity, with lifecycle

Type an MPN and your build quantity. Circuit Sherpa queries DigiKey and Mouser in parallel and ranks every offer by what your quantity costs at each distributor's price break, never by a reel price you cannot use. Every part shows its lifecycle status, Active, NRND or End of life, with the distributor that reported it, and says so when the distributors disagree. When a part is dying or out of stock, it shows the replacements DigiKey and Mouser name for it, each with the field that named it and its price at your quantity.

📋

Your whole BOM, priced in one paste

Drop in a CSV — MPN and quantity is all it takes. Every line gets priced at the price break for its quantity, totals roll up for the whole board, and each line shows stock and warns when your quantity is under the distributor's MOQ.

📈

Fresh data, with a memory

Prices and stock come straight from distributor APIs and are refreshed every 6 hours — not stale scrapes — with the observation time shown on every part. Circuit Sherpa also tracks price history per part, so you can see where a price is heading, not just where it is.

🔔

Alerts do the re-checking for you

Set a target price and the number you are building. A Circuit Sherpa price alert compares the price at your build quantity, the distributor's price break for that many pieces, not the single-unit price. It checks daily and emails you the moment an offer crosses your line. Stop keeping a mental list of parts to re-quote.

BOM pricing

Know your build cost before you commit to it.

Paste your BOM as CSV — MPN and quantity is all it needs. Circuit Sherpa prices every line against DigiKey and Mouser offers, picks the cheapest one that can actually fill it, totals the build, and puts an MOQ warning and that distributor's own stock on every line — with a warning when it is short of your quantity, so a thin part is visible before it becomes a schedule slip. Sort by line cost to see where the build money is. Export the priced BOM back to CSV when you're done.

MPNQtyBestLineStock
STM32F103C8T610$2.29$22.9010,400
at DigiKey
LM358N50$0.42$21.0031,850
at Mouser
ATMEGA328P-PU5$3.81$19.052,116
at DigiKey
ACS712ELCTR-05B-T8$2.15$17.20234
at Mouser
MOQ 10
Total$80.65

Fair questions, straight answers

Why not just open the distributor sites?
You can — that's the six-tab workflow this replaces. Each distributor only shows its own stock and its own price. Circuit Sherpa runs the comparison for you and links you straight to the winning distributor to buy. No markup, no middleman, no inventory of ours in between.
What distributors does Circuit Sherpa search?
Circuit Sherpa queries DigiKey and Mouser directly on every search. Offers from the Nexar network (Arrow, Avnet, TTI and others) are included only when Nexar credentials are configured. Every result names which of those answered, which could not be reached and which are not connected, so a distributor that is missing from a comparison never reads as a part nobody has. LCSC (JLCPCB's catalogue) is not queried at all: check it yourself if it is a candidate supplier.
How fresh is the data?
Offers come from the distributor APIs — price, stock, and packaging as the distributor reported it. Prices are refreshed once they are more than 6 hours old, and every price shows when it was observed, so a price waiting on its refresh is labelled with its real age. Every fresh observation feeds the per-part price history.
Can I price an entire BOM at once?
Yes. Pro and Team plan users can paste their bill of materials as CSV and get every line priced at the price-break tier for its quantity, with an MOQ warning on each line, the stock the priced distributor itself holds, and a warning when that is short of the quantity you asked for. Say how many boards you are building and every line is costed at its quantity times that, which is the price break the order actually gets rather than the single-board tier. Sort the result by line cost to see what the build money is, or by what needs attention. BOM history is saved so you can track cost changes over time.
What happens to my BOM data?
It stays yours. BOM history is kept for 90 days on paid plans so you can re-price a build, and you can export or delete it whenever you want. We don't sell data and we don't process purchases — buy links go directly to the distributor.
How do price alerts work?
Set a target price for any component and the quantity you are building. A Circuit Sherpa price alert compares the price at your build quantity, the distributor's price break for that many pieces, not the single-unit price. Once a day Circuit Sherpa looks that exact part number up and emails you, naming the distributor, when it can be ordered at or below your target at that quantity — at or above the offer's minimum order quantity, with that many in stock on the shelf. One alert is free.
What does Circuit Sherpa cost?
There's a free tier with 10 searches per day and one price alert. Pro is available for unlimited searches, BOM costing, and up to 20 price alerts. Team plan adds 5 seats and REST API access.
Do I need an account to search?
Not for a quick look. The home page runs a free preview with no account at all: the top 3 results from DigiKey and Mouser, up to 10 previews an hour. A free account (magic link, no password) gives you 10 full searches a day and one price alert.

Pricing that respects your time

Free for quick lookups · Pro at $29/mo for unlimited search, BOM pricing, and alerts · Team at $99/mo adds seats and a REST API

Compare plans →

Your next BOM shouldn't take an afternoon to price.

Start free — 10 searches a day, one price alert, DigiKey and Mouser, no credit card.

Search your first part